Selecta Spray Gun

Simply Indispensable in the Sterile Services Department, Laboratory or Medical Practice.

The Selecta Spray Gun is the ideal instrument for cleaning laboratory glassware, pipettes, syringes, catheters, curettes, endoscopes, cystoscopes, cannulae and a variety of other instruments and articles used in Sterile Services, laboratories, and medical practices in other words, everywhere where highest cleanliness and hygiene are mandatory.

The Selecta Spray Gun uses either water or pressurized air this means the cleaning process is quick, efficient and inexpensive. The Selecta Spray Gun features a new type of internal flow control mechanism. It permits the smooth and simple adjustment of the water or air flow across the entire range of the trigger movement.

The desired maximum water or air flow can be set by using the small knurled screw located behind the trigger. It is then regulated via the trigger up to the set maximum value.

The Selecta Spray Gun shown without spray attachments

With Metal Tubing

With Plastic Tubing (Standard)

The Practical Selecta Tabletop Rosette

The tabletop rosette, a threaded hollow cylinder, facilitates the installation of the Selecta Spray Gun in the sink or a countertop. The spray gun is then within easy reach. The tubing with the respective connector to the water or air supply is stored away underneath the counter or sink, thus keeping the work area clutter-free.

Code 64-20621-00

A Set of Attachments That Meets Every Need

Rinsing, suction or drying in every area of application is made possible through the set of 8 attachments. The standard set of 8 attachments is delivered on a stable storage rack for mounting on the wall. All attachments are kept within easy reach.

Code 64-20620-20

Easy to use

The Selecta Spray Gun features a new type of internal flow control mechanism. It permits the smooth and simple adjustment of the water or air flow across the entire range of the trigger movement. The desired maximum flow can be set by using the small knurled screw located behind the trigger. It is then regulated via the trigger up to the set maximum value.

All attachments are connected to the spray gun by seating them on the safety cone located at the spray gun tip. Even high pressure cannot disconnect them. The gun grip is heat insulated.
The Selecta Spray Gun can be ready for operation very quickly:

  1. The storage rack with the attachments is fastened to a wall near the sink or work area. 
  2. The tubing is connected to the tap with an threaded connector. If the spray gun is to be operated with compressed air, the tubing must be connected to the air supply by means of a suitable connector (cannot be supplied by Caterham).
Product Code Description
64-20900-00 SELECTA Spray Gun Rinser new model complete with 1,5 m tube, guide cone, standard set and 3/4" Tap connector
64-20900-01 SELECTA Spray Gun Rinser new model complete with 1,5 m tube, guide cone, standard set and 1/2" Tap connector
64-20920-01 SELECTA Spray Gun Rinser new model with 1,6 m metal tube, guide cone, table-top rosette and 3/4" screwing assembled
64-20920-02 SELECTA Pure Spray Gun Rinser new model
64-20920-05 SELECTA Spray Gun Rinser new model with 1,5 m tube and guide cone assembled (End open)
64-20920-06 SELECTA Spray Gun Rinser new model with 3,0 m tube and guide cone assembled (End open)
64-20620-05 Tip A for catheters, valves etc.
64-20620-06 Tip B for drainage tubings
64-20620-08 Tip C spray jet for rapid instrument cleaning
64-20620-03 Tip D for syringes and cannulas with record cone
64-20620-04 Tip E for measuring and blood pipettes
64-20620-07 Tip F for syringes and cannulas with Luer cone
64-20620-09 Tip G for bottles and Erlenmeyer flasks
64-20620-10 Tip H Selecta water jet pump for suction cleaning
64-20621-00 Table-top rosette 54 mm with guide cone
64-20621-01 Table-top rosette 54 mm with nut without guide cone
64-20621-02 Guide cone to screw
64-20620-11 Tip M long nozzle, straight, 10 in.
64-20620-12 Tip N long nozzle, angled, 10 in.
64-20620-20 Standard set A-H with stable rack
64-20620-21 Stable rack for 8 attachments complete with 2 screws
64-20630-09 Screwing 3/4" complete
64-20630-10 Screwing 1/2" complete
64-20630-11 Screwing 3/8" complete

Spare parts for spray gun rinser

Product Code Description
64-20630-01 Spray gun rinser tip complete
64-20630-02 O-ring 3x1
64-20630-03 Spiral tension pin
64-20630-04 Trigger
64-20630-06 Connection between gun and tubing
64-20630-07 Hose clip
64-20630-08 Replacement kit flow control
64-20630-12 Clamp for PVC-tube
64-20630-13 Clamp for metal-tube
64-20630-14 PVC-tube (cut good)
64-20630-15 Grip for spray gun rinser
64-20630-16 Sealing 3/4"
64-20630-17 Sealing 1/2"
64-20630-18 Sealing disc
64-20630-19 Tubetull
64-20630-20 Reduction ring 1/2" and perlator
64-20630-21 Reducing ring 1/2" and 3/8"
64-20630-22 Hook
64-20630-23 Metal tubing 3/4" junction, 1,6 m
64-20630-24 Metal tube